Page 10 of 28 FirstFirst ... 8910111220 ... LastLast
Results 91 to 100 of 279

Thread: Mooks HQ, HJ, HX, HZ, WB Sandman Mockup

  1. #91
    Cruiser the ski man's Avatar
    Join Date
    Jul 2010
    Location
    Radelaide SA
    Posts
    242
    i've got a entire front set of sealed beam mounting bits if you want at them, my halogen reflectors fit with no problems, just popped the reflector into the holder, popped the trim ring on and presto, no issues.

    i used a Narva headlamp kit and yes, the glass does poke out a little but thats because the H4 globe is quite long.

    the taillights have a little oval shaped stainless clip that sits in the hole, it is very similar to the same clips you get on badges, just a wee bit bigger... holdens used a bit of caulking to seal the pin holes too, (thats the hard beige stuff you find around the pins on 'fresh off the car' surrounds)

    drop me a PM with your details if you need to scavenge any bits mate

  2. #92
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744
    Started to try to put bits back on over the weekend.
    MASSIVE FAIL!
    nothing was going to happen easily.
    serves me right for buying the cheap headlight kit.

    I kinda expected that this would happen, considering that all of the cars that have gone onto the van were in bits and the van was a rolling shell..

    OZ would you be kind enough to harvest me some clips from your meadow of fine relics? or anyone else for the matter?
    Last edited by mook; 05-07-2011 at 12:33 AM.

  3. #93
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Mook are those lights another candidate for the Neil Young song Piece of Crap?

  4. #94
    Cruiser
    Join Date
    Jun 2011
    Location
    Victoria
    Posts
    395
    Quote Originally Posted by wbute View Post
    Mook are those lights another candidate for the Neil Young song Piece of Crap?

  5. #95
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    mook..heres the pics of the narrowed rear bar on my injected van...






    --- Updated ---

    to do the narrowed rear bar properly you must use a corner cut from a sedan or wagon to get it to tuck in without touching as per the pics..the guy that built it made his own bar brackets so this bar does tuck in a bit closer hence the touching on the body..

  6. #96
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744
    very much appreciated! looks to be a bit of a bind..
    Looks like ill be going for the bumperettes then.
    I'll show my mate that's helping me with the build. He is a fan of the full width rear bar, i was too.. but I'm starting to think that the bumberettes are better idea.

    Enjoy the great weather you are having!

    BTW those headlight surrounds are great! I'll post some pics once i have worked out how to polish them.

  7. #97
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    its cold and windy but the suns out...glad your happy with the surrounds,dont get em mint like that very often.

  8. #98
    Cruiser Sandman_77's Avatar
    Join Date
    Mar 2010
    Location
    Paradise NSW
    Posts
    298
    Quote Originally Posted by mook View Post
    Started to try to put bits back on over the weekend.
    MASSIVE FAIL!
    nothing was going to happen easily.
    serves me right for buying the cheap headlight kit.

    I kinda expected that this would happen, considering that all of the cars that have gone onto the van were in bits and the van was a rolling shell..

    OZ would you be kind enough to harvest me some clips from your meadow of fine relics? or anyone else for the matter?
    the light syou got from kingswood country are they these ones I am thinking of running a set of super bright lights for the wagon and need some advice

    http://cgi.ebay.com.au/ws/eBayISAPI....STRK:MEWAX:VRI

    As for grille hmmm I have a mint grille on the wagon looking for a mint HZ grille, if i find one happy to sell the HJ one

    77

  9. #99
    Cruiser the ski man's Avatar
    Join Date
    Jul 2010
    Location
    Radelaide SA
    Posts
    242
    http://www.narva.com.au/products/browse/standard-optics

    PN# 72050 is what i used for my dual beams (outers), they swap straight into the holden housings with no mods

    i have original hella halogen high beams (inners) which dont have any pattern on the front glass, but would like a new set of reflectors as mine are slightly corroded... narva also do a simelar version but i cant confirm they fit in the holden housings

    skiman

  10. #100
    Cruiser Sandman_77's Avatar
    Join Date
    Mar 2010
    Location
    Paradise NSW
    Posts
    298
    Quote Originally Posted by the ski man View Post
    http://www.narva.com.au/products/browse/standard-optics

    PN# 72050 is what i used for my dual beams (outers), they swap straight into the holden housings with no mods

    i have original hella halogen high beams (inners) which dont have any pattern on the front glass, but would like a new set of reflectors as mine are slightly corroded... narva also do a simelar version but i cant confirm they fit in the holden housings

    skiman
    Sorry for the highjack of your thred mook

    ski what sort of dollars was these n you think 72060 would be good inner - high beams??

    agro u reading this??

    77

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. WB 1-tonner Overlander mockup
    By HK1837 in forum Vehicles or Items Found for Sale
    Replies: 2
    Last Post: 16-06-2013, 11:42 PM
  2. Mooks big day
    By thatotherguy in forum The Lounge
    Replies: 12
    Last Post: 05-12-2012, 08:16 PM
  3. Mooks dash
    By Absinth in forum Interior
    Replies: 14
    Last Post: 10-10-2012, 01:01 AM
  4. Replies: 16
    Last Post: 06-04-2011, 07:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •